Training ISO 17025 - Pelatihan Laboratorium - Konsultan ISO 17025 » lab course

Implementing an Effective Health and Safety Program in the Laboratory Batch VIII, Bandung 29 – 30 September 2010

admin — Thu, 08 Jul 2010 14:00:35 +0000

There are many categories of hazards that might be encountered in a laboratory setting, and situations can change frequently. Even after you have identified and controlled all current risks, it is critical that you remain open to the possibility that new unexpected dangers can arise. Periodically verify the hazards are required. All employees who work with hazardous chemicals must be apprised of the hazards of chemicals present in their work area. This training must be provided before initial assignment and before new exposure situations. Personal protective equipment necessary for the safe handling of hazardous substances must also be provided. Employees who work with chemicals in laboratories must be trained on the Laboratory Standard. Additional training is required when new exposure situations arise. Such situations include the use of new chemicals, greater quantities of chemicals, and different procedures.

TRAINING LABORATORY SAFETY Course Content

The Occupational Health Introduction.
Potential Hazards in Laboratory (ILO – International Hazard Datasheets on Occupation)
COSHH (Control of Substances Hazardous to Health)
MSDS and Labeling
Laboratory Safety Practices.
Ventilation.
Personal Protective Equipment
Laboratory Ergonomics
Hazardous Waste and Emergency Procedure
Laboratory Safety Management System (Laboratory Safety Plan)
Exposure monitoring, Medical Surveillance and Bio Monitoring.

WHO SHOULD ATTEND?

Health and Safety Committee members
Managers, supervisors and worker
Facility managers
Human resources managers
Senior managers
Others with health and safety responsibilitie

DURATION
14 hours effective (2 days)

TRAINER
Abdul Baktiansyah, Dr, MS.
Beliau sangat berpengalaman dalam Kesehatan Kerja (Health) selama hampir 30 tahun. Pendidikan formal beliau didapat dari Fakultas Kedokteran Universitas Airlangga pada tahun 1979, dan Magister of Science dalam Kedokteran Okupasi dari Bagian Ilmu Kesehatan Masyarakat, Fakultas Kedokteran Universitas Indonesia (2004), beliau juga sering mengikuti berbagai training baik itu di dalam maupun di luar negeri yang berkaitan dengan Kesehatan dan Keselamatan Kerja. Perjalanan Karir beliau sebagai praktisi kesehatan kerja dmulai sejak tahun 1982 – 2005, dimana beliau pernah mengemban jabatan sebagai Chief Medical Officer pada PT. Ekspan Kalimantan dan kemudian menjadi Occupational Health & Industrial Hygiene Coordinator pada PT. Medco Energy E&P. Sekarang ini beliau aktif sebagai trainer & konsultan pada bidang Occupational Health & Industrial Hygiene.

COURSE SCHEDULE

1. Bandung, 20 – 21 Mei 2010
2. Bandung, 29 – 30 September 2010
3. Bandung, 22 – 23 Desember 2010

INVESTMENT
Pendaftaran per peserta Rp. 3.750.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training Rp. 3.500.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit: tas, Block Note, ballpoint, termasuk jaket atau t shirt, Lokasi training yg nyaman di hotel berbintang empat / lima, Makan Siang, coffee / tea break,Sertifikat,Flash disk berisi materi training, Foto bersama seluruh peserta

REFERENSI
1. PT Pertamina UP II Dumani
2. PT.BSP – Pertamina Hulu
3. PT.Lontar Papyrus Pulp & Paper Industry
4. PT.Banpu Indominco
5. PT.Tri Polyta Indonesia TBK
6. PT.IKPP TBK-Perawang Mills
7. PT.Indah Kiat Perawang
8. PT. Sud Chemie Indonesia
9. PT. Trubaindo Coal Mining
10.Politeknik Negeri Pontianak
11.PT. Indopherin Jaya
12.Sekolah Pelita Harapan
13.PT. Kaltim Parna Industri
14.PT. Pupuk Kujang
15.PT. Equilab International
16.Institut Teknologi Bandung Program Studi Teknik Kimia
17.Institut Teknologi Bandung Program Studi Teknik Fisika
18.PT. PLN (Persero) PUSDIKLAT
19.Fakultas Kedokteran UII
20.Unika ATMAJAYA Jakarta

Enhancing Laboratory Performance by Internal Quality Control Program Batch VI, Bandung 28 – 29 Oktober 2010

admin — Fri, 11 Jun 2010 18:50:37 +0000

Globalization drags all business sectors into a very tight competition, resulting in the improvement of quality of products and services. Only the ones that have a competent laboratory applying a good and systematic quality control process can survive against this competition. We are eager to share experiences by helping industries, organization, government institution, laboratory and other business sectors understand and implement activities in maintaining the competence & quality of their testing laboratory

OBJECTIVE
After having been trained, all trainees are expected to be able to make sure that the data produced by the laboratory through a systematic process of quality control are reliable and eliminate any possible mistakes and minimize every error in the process of analysis

TRAINING SYLABUS:

General Overview
Initial Laboratory Capability Performance
Quality Control in Sample Management
Quality Control in Laboratory Testing
QC Tools: Calibration and Verification, Intermediate Check and Statistical Quality Control Charts
Reporting Technique
DataQuality Assessment
Relationship among Significant Figures Detection Limit and Measurement Uncertainty
Evaluation and Development of Analytical Methods by Method Validation

WHO SHOULD ATTEND??

Quality Managers in Testing Laboratories
Technical Managers in Testing Laboratories
Heads/Supervisors/Technicians in Testing Laboratories
All who involved in the development of laboratory quality management system

DURATION
14 hours effectifely (2 days)

TRAINER
Yayan Setiawan, Ir
He is one of senior consultant of PT. Phitagoras Global Duta with deep experiences in providing many training and consultancy in laboratory quality management system based on ISO/IEC 17025 and quality system based on (ISO 9000) since 1998. His formal education is Chemistry and Chemical Engineering.
His professional carreer began with joining Dow Chemical Indonesia (1992 – 1994), PT. Polytama Propindo (1994 – 1998), dan PT. Australian Laboratory Services Indonesia (1998 – 2005). Recently, he gives many training and consulting services to help industries, organizations, government institutions, laboratories, and other business sectors in implementing Quality Management System based on ISO/IEC 17025, among them are: PT. Corelab Indonesia, PT. Australian Laboratory Services Indonesia and the European Union – TSP Project in the Indonesian Ministry of Marine Affair & Fisheries.
He is also one of the members of the Technical Sub-Committee for the Preparation of Indonesian National Standard in the field of Environment in the Indonesian Ministry of Environment and he is also an ISO 17025 Certified Assessor.

COURSE SCHEDULE
1. Jakarta, 25 – 26 March 2010
2. Bandung, 28 – 29 June 2010
3. Bandung, 28 – 29 October 2010

INVESTMENT
Per Participant Rp. 3.750.000,-
Pay and register within 14 days before the training Rp. 3.500.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate, Exclusive flash disk, Photo

REFERENCE :
1. PT.Indonesia Asahan alumunium (Inalum)
2. PT.Dystar colour Indonesia
3. PT.Jawamanis Rafinasi
4. ITI
5. UI
6. PT.Indah Kiat PULP & Paper
7. PT.Sucofindo Timika Site
8. ConocoPhillips
9. PT. YTL Jatim
10.PT. Semen Gresik
11.Puslitbang Ekologi & Status Kesehatan
12.Dep Kes
13.Badan Lingkungan hidup Provinsi DIY
14.PT. Semen Padang
15.PT. Hyprowira Adhitama
16.PT. Karenindo Citra Utama
17.PT. Sriboga Raturaya
18.Vico Indonesia
19.Universitas Bangka Belitung
20.PT. Dankos Farma
21.PT. Clariant Indonesia