Training ISO 17025 - Pelatihan Laboratorium - Konsultan ISO 17025 » lab training http://iso17025consultant.com Just another WordPress site Wed, 25 Aug 2010 00:18:09 +0000 en hourly 1 http://wordpress.org/?v=3.0 Implementing an Effective Health and Safety Program in the Laboratory Batch VIII, Bandung 29 – 30 September 2010 http://iso17025consultant.com/lab-safety-training/ http://iso17025consultant.com/lab-safety-training/#comments Thu, 08 Jul 2010 14:00:35 +0000 admin http://iso17025consultant.com/?p=41 There are many categories of hazards that might be encountered in a laboratory setting, and situations can change frequently. Even after you have identified and controlled all current risks, it is critical that you remain open to the possibility that new unexpected dangers can arise. Periodically verify the hazards are required. All employees who work with hazardous chemicals must be apprised of the hazards of chemicals present in their work area. This training must be provided before initial assignment and before new exposure situations. Personal protective equipment necessary for the safe handling of hazardous substances must also be provided. Employees who work with chemicals in laboratories must be trained on the Laboratory Standard. Additional training is required when new exposure situations arise. Such situations include the use of new chemicals, greater quantities of chemicals, and different procedures.

TRAINING LABORATORY SAFETY Course Content

  1. The Occupational Health Introduction.
  2. Potential Hazards in Laboratory (ILO – International Hazard Datasheets on Occupation)
  3. COSHH (Control of Substances Hazardous to Health)
  4. MSDS and Labeling
  5. Laboratory Safety Practices.
  6. Ventilation.
  7. Personal Protective Equipment
  8. Laboratory Ergonomics
  9. Hazardous Waste and Emergency Procedure
  10. Laboratory Safety Management System (Laboratory Safety Plan)
  11. Exposure monitoring, Medical Surveillance and Bio Monitoring.

WHO SHOULD ATTEND?

  1. Health and Safety Committee members
  2. Managers, supervisors and worker
  3. Facility managers
  4. Human resources managers
  5. Senior managers
  6. Others with health and safety responsibilitie

DURATION
14 hours effective (2 days)

TRAINER
Abdul Baktiansyah, Dr, MS.
Beliau sangat berpengalaman dalam Kesehatan Kerja (Health) selama hampir 30 tahun. Pendidikan formal beliau didapat dari Fakultas Kedokteran Universitas Airlangga pada tahun 1979, dan Magister of Science dalam Kedokteran Okupasi dari Bagian Ilmu Kesehatan Masyarakat, Fakultas Kedokteran Universitas Indonesia (2004), beliau juga sering mengikuti berbagai training baik itu di dalam maupun di luar negeri yang berkaitan dengan Kesehatan dan Keselamatan Kerja. Perjalanan Karir beliau sebagai praktisi kesehatan kerja dmulai sejak tahun 1982 – 2005, dimana beliau pernah mengemban jabatan sebagai Chief Medical Officer pada PT. Ekspan Kalimantan dan kemudian menjadi Occupational Health   & Industrial Hygiene Coordinator pada PT. Medco Energy E&P. Sekarang ini beliau aktif sebagai trainer & konsultan pada bidang Occupational Health & Industrial Hygiene.

COURSE SCHEDULE

1. Bandung, 20 – 21 Mei 2010
2. Bandung, 29 – 30 September 2010
3. Bandung, 22 – 23 Desember 2010

INVESTMENT
Pendaftaran per peserta                                                             Rp. 3.750.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training                Rp. 3.500.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit: tas, Block Note, ballpoint, termasuk jaket atau t shirt, Lokasi training yg nyaman di hotel berbintang empat / lima, Makan Siang, coffee / tea break,Sertifikat,Flash disk berisi materi training, Foto bersama seluruh peserta

REFERENSI
1.  PT Pertamina UP II Dumani
2.  PT.BSP – Pertamina Hulu
3.  PT.Lontar Papyrus Pulp & Paper Industry
4.  PT.Banpu Indominco
5.  PT.Tri Polyta Indonesia TBK
6.  PT.IKPP TBK-Perawang Mills
7.  PT.Indah Kiat Perawang
8.  PT. Sud Chemie Indonesia
9.  PT. Trubaindo Coal Mining
10.Politeknik Negeri Pontianak
11.PT. Indopherin Jaya
12.Sekolah Pelita Harapan
13.PT. Kaltim Parna Industri
14.PT. Pupuk Kujang
15.PT. Equilab International
16.Institut Teknologi Bandung Program Studi Teknik Kimia
17.Institut Teknologi Bandung Program Studi Teknik Fisika
18.PT. PLN (Persero) PUSDIKLAT
19.Fakultas Kedokteran UII
20.Unika ATMAJAYA Jakarta


]]> http://iso17025consultant.com/lab-safety-training/feed/ 0 Four Days Comprehensive Training on Estimation of Measurement Uncertainty, Bali 23 – 26 November 2010 http://iso17025consultant.com/measurement-uncertainty/ http://iso17025consultant.com/measurement-uncertainty/#comments Fri, 11 Jun 2010 18:20:29 +0000 admin http://iso17025consultant.com/?p=31 Uncertainty in measurement, now becomes a crucial parameter for laboratory testing or calibration results. So many training provided out there introducing laboratory people to the concept of the UNCERTAINTY, many of the trainees say the training gives  the UNCERTAIN output.  We learnt from the experiences and we will not give you the UNCERTAINTY but we will give the CERTAIN TRAINING of the ESTIMATION MEASUREMENT UNCERTAINTY. Besides, many industrial sectors strictly applied the uncertainty parameter as their requirement. So, for the labs want to achieve the capability of providing uncertainty of measurement, our training program is the right answer.

OBJECTIVE
After having been trained,  all the trainees are expected to absorb the essence of the philosophy of the training material and be able to calculate the estimation of uncertainty and apply it in the result of analysis or calibration and have a deep knowledge of how to overcome the difficulties in estimating the uncertainty.

TRAINING SYLLABUS

  1. Review Laboratory Management System based on ISO/IEC 17025:2005
  2. Term and definition related to uncertainty
  3. Concept of Uncertainty of measurements
  4. Statistical concept
  5. Probability distribution & uncertainty
  6. Significant digits & uncertainty
  7. Detection limit & uncertainty
  8. Exercise of estimation of uncertainty for testing results

WHO SHOULD ATTEND??

  1. Quality Managers in Testing Laboratories
  2. Technical Managers in Testing Laboratories
  3. Supervisors in Testing Laboratories
  4. Technician in Testing Laboratories
  5. Head of Testing Laboratories
  6. All who involved in the development of laboratory quality management system based on ISO/IEC 17025: 2005 in companies/ organisation / business unit and laboratory

DURATION
28 hours effectively (4 days)

TRAINER
Yayan Setiawan, Ir
He is one of senior consultant of PT. Phitagoras Global Duta with deep experiences in providing many training and consultancy in laboratory quality management system based on  ISO/IEC 17025 and quality system based on (ISO 9000) since 1998.  His formal education is Chemistry and Chemical Engineering.
His  professional carreer began with joining Dow Chemical Indonesia (1992 – 1994), PT. Polytama Propindo (1994 – 1998), dan PT. Australian Laboratory Services Indonesia (1998 – 2005).  Recently, he gives many training and consulting services to help industries, organizations, government institutions, laboratories, and other business sectors in implementing Quality Management System based on ISO/IEC 17025, among them are:  PT. Corelab Indonesia,   PT. Australian Laboratory Services Indonesia and the European Union – TSP Project in the Indonesian Ministry of Marine Affair & Fisheries.
He is also one of the members of the Technical Sub-Committee for the Preparation of Indonesian National Standard in the field of  Environment in the Indonesian  Ministry of Environment and he is also an  ISO 17025 Certified Assessor.

GLP COURSE SCHEDULE 2010
1. Bandung, 6 – 9 July 2010
2. Bali, 23 – 26 November 2010

INVESTMENT:
Per Participant                                                                                   IDR 7.250.000,-
Pay and register within 14 days before the training                 IDR 7.000.000,-
The 5th participant is FREE if you register 4 person from one company
Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate, Exclusive flash disk, Photo

REFERENSI :
1.  PT. Riau Andalan Pulp&Paper
2.  PT. Coca Cola Bottling Indonesia
3.  PT. Semen Gresik
4.  PT. ISM Bogasari Mills
5.  PT. Scheider Electric Manufacturing
6.  PT.Indocement Tunggal Prakarsa
7.  PT. Charoen Pokphand Indonesia
8.  Dinas PU. Bina Marga Jatim
9.  PT. Pertamina (Persero) UP II Dumai
10. PT. DEXA Medica
11. PT. Nike Inc
12. PT. Jababeka Infrastruktur
13. UI
14. PT. Hyprowira Adhitama
15. Biofarma
16. PT. Mitutoyo Indonesia
17. PT. Kievit Indonesia
18. PT. GMF Aero Asia
19. IKPP
20. PT. Santos Premier Krimer
21. Vico Indonesia
22. PT. Badak NGL
23. ConocoPhillips
24.PT. Eastern Pearl Flour Mills
25.PT. Citra Ina Feedmill
26.PT. Chevron Pacific Indonesia
27.PT. GS Battery

  1. Pre Registration Training
  2. (Wajib Diisi)
  3. (valid email required)
  4. (Wajib Diisi)
  7. (Wajib Diisi)
  8. (Wajib Diisi)
 

cforms contact form by delicious:days

]]> http://iso17025consultant.com/measurement-uncertainty/feed/ 0